GE Healthcare · MRSigna2284297
New Operator Workspace PC FRU is Physically Different From Original Part.
Symptom
New Operator Workspace PC FRU Does Not Fit in Indigo-Based LX1 System See Long Description The "PC Workstation" part number listed in the FRU manual for the LX1 Indigo Duplex Module is no longer available. When that part number is ordered, it "crosses up" to another PC part number 2284297. FE found that the new PC FRU part number 2284297 will not fit in the LX1 Duplex Module.
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 8.3 8.3
- Component
- 2324827 LX1 PC UPGRADE KIT See Long Description LX1 PC Upgrade Kit part number 2324827 for adapting the new Operator Workspace PC FRU to Indigo-based Signa LX Operator Workspace. When you replace the original PC on an Indigo computer-based Signa LX system you need this kit to make the new FRU PC fit. The kit's contents are fully described in the PC Upgrade Kit Purchase Specification document # 2135999-17PSP (see attachment). File is from ePDM, one must have an ePDM account to be able to access it there.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.