GE Healthcare · CTLightSpeedVCT260005015260005017
LightSpeed 3.X (Ultra, Plus, QX/i) - GOC2
Symptom
Applications software fails to boot up completely and automatically shuts itself back down. Applications software fails to boot up completely and automatically shuts itself back down
Error message
Error: 260005015 Problem was detected while validating the system configuration. see long descrption for details Fri Nov 14 05:30:46 2008 Error: 260005015 Host: ct01 Process: procICE File: procICE.c Line: 647 A problem was detected while validating the system configuration. This could be a system installation problem or an invalid entry in the config file 'procICE.cfg'. Error: 260005017 There is a problem with the ICE kernel file '/dev/gemsice' : OS error : 2 See long description for details Fri Nov 14 05:30:46 2008 Error: 260005017 Host: ct01 Process: procICE File: procICE.c Line: 482 There is a problem with the ICE kernel file '/dev/gemsice' : OS error : 2 No such file or directory (this file is required by the ICE CPU)
Applies to
- Models
- LightSpeed, VCT
- Product
- LightSpeed 3.X (Ultra, Plus, QX/i) - GOC2 This is HP CPU host running LINUX with Pegasus IG. 308L.8_H3.3M4 ~ 4 or 8 slice MDAS. ~ Could be an Ultra, Plus or QXi system. Must run swokinstall -p to verify. ~ See Long description for details . LightSpeed 3.X MDAS4 Gantry and GOC2 Gantry - 2281177-2, DAS - 2272768, Console – 2341104-2, Table - 2276776, PDU - 2269902 Links to the updated Product Service Manuals, FMIs, Service Notes, Option Manuals and Operator Documents can be found online at the attached sites. Always use the most appropriate documentation for your system.
- Component
- 2368697 Linux DDR Workstation - Used on GOC2 only See long description for details Part #: 2368697 Part Type: GP CONSUMABLE - RETURNABLE Part Weight: 0.00 LBR Repairable: No Returnable: Yes Hazardous Material: N Description: LINUX DDR WORKSTATION - GEMS CT USA FRU: Yes Status: Orderable Comments: FLS 3/5/05 (212001261 Shawn Fox) HOST COMPUTER (HP). THIS IS THE GOC2 HP 8000 COMPUTER . ***EXTREMELY IMPORTANT: NEW SOFTWARE, S/W LOAD PROCEDURE AND S/W OPTION KEYS ARE REQUIRED IF THE HP8000 COMPUTER IS REPLACED. Contact the OLC to assist with new Option Keys.
- Area
- CT
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare CT issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required