GE Healthcare · X-ray R&FDefinium
AMX700 The detector park switch was broken.
Definium AMX700 Unit drives in slow speed only due to a defective Detector Park Switch
Symptom
AMX700 The detector park switch was broken. Detector park switch also needs to be activated foe normal drive speeds. On this unit the detector park switch was broken. Jumpering out the detector park switch contact verified that the switch was defective and allowed maximum speed travel.
AMX700 AMX 700 drives in slow speed only. X-ray tube arm is parked and is sensed by the park switch hall effect sensor.
Applies to
- Models
- Definium
- Product
- Portables Definium AMX 700
- Area
- X-ray R&F
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray R&F issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray R&F issues
- AEC Backup Time message
- Definium 8000 Auto positioning does not work after a reset/reboot due to wall stand receptor at a hard limit during rebooting or repowering.
- Definium 8000 One or both monitors display the following message on every boot
- Definium 8000 Wallstand or Table Only Configurations running VolumeRAD M3 Software.
- Definium 8000 OTS Collimator has no power due to a tripped breaker (CB8) ont he Tube Suspension Logic (TSL) Board.
- Definium 8000 The Siemens Collimator has not power due to a tripped breaker (CB9) on the Tube Suspension Logic (TSL) Board.