MDS Link faults and Loss of AC Mains.

Symptom

Error message

2239849 Gradient Subsystem Clock Loss. Fri May 18 11:41:58 2001 Error: 2239849 Host: oc001 Process: NSP File: HPC_PORT_ID:spi_scif Line: 510 Gradient Subsystem Clock Loss. Verify the clock cable between the TYME II card and the gradient subsystem.

2225697 MDS link failure. The IPG failed to receive an MDS transmission echo on a second try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. MDS timer: 0x0012 Transmitted byte: 0x11 2225697 MDS link failure. The IPG failed to receive an MDS transmission echo on a second try. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. MDS timer: 0x0012 Transmitted byte: 0x11

2240311 Gradient amplifier fault 7. AMP No. 1 Loss of AC mains phase fault occurred on PSU. 2240311 Host: oc001 Process: NSP File: HPC PORT ID:spi scif Line: 130 Gradient amplifier fault 7. AMP No. 1 Loss of AC mains phase fault occurred on PSU. Please check the 3 phase power cable between the GPS and the PDU.

2240255 Y-axis gradient amplifier state 5. AMP No. 1 2240255 4 oc001 NSP HPC_PORT_ID:spi_scif 150 Y-axis gradient amplifier state 5. AMP No. 1 Auxiliary voltage present.

Applies to

Models

Signa

Product

Profile 3 Ultrasparc CPU with AN8290Y gradients

Software

7.8x Profile4 or ProfileHSR only

Component

2178377-2 HV supply

Area

MR

Related GE Healthcare MR issues

• Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
• Fails to Scan with TORSO Coil.
• The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
• AE title has changed on destination host.
• CWA ID100315. Auto and Manual Prescan Fails.
• What is the Acoustic Noise Level in the Ovation Magnet.