GE Healthcare · Nuclear Medicine
Maxxus gantry/table, no motions on any axis, only following errors.
Symptom
Maxxus gantry/table, no motions on any axis, only following errors. Maxxus gantry/table, no motions at all following errors. No Gantry/Table motions, any axis, not even with jogbox in. No matter what axis is used, get following error. Even with the Table disconnected
Applies to
- Product
- Maxxus Maxxus product Maxxus product
- Component
- *Gantry Gantry Gantry
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- Muga patch FMI 40788 when loaded does not indicate it completed
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Part number needed for Optima E-Stop
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Service Note 43783_1 Feb/08 Infinia/Ventri/Xeleris 1.1 & 2
- Need part numbers for the Millennium MG/MC table E-Stop