GE Healthcare · Nuclear MedicineMillennium
MG/MC/Myosight, No motion on Radius 1, Radius 2, table vertical and table lateral.
Symptom
MG/MC/Myosight, No motion on Radius 1, Radius 2, table vertical and table lateral. Error 87 encoder fault was the only error Table longitudinal and gantry rotational were the only axis's that could be moved. MG/MC/Myosight, No motion on Radius 1, Radius 2, table vertical and table lateral. Error 87 encoder fault was the only error. Table longitudinal and gantry rotational were the only axis's that would moved.
Error message
Error #87 (Error 87) Encoder Error on Millennium System
Applies to
- Models
- Millennium
- Product
- MG/MC/Myosight Millennium MG/MC Millennium MyoSIGHT
- Component
- *IPS IPS IPS
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Need part numbers for the Millennium MG/MC table E-Stop
- How do I Delete a file on Genieacq that the system thinks is still acquiring
- VG, the contour works... but in the opposite way.
- MG_MC_MyoSight_MPR_MPS Bar Phantom Resolution Size