GE Healthcare · MRSigna2225686
2225686 The bore temperature reading is low due to Lytron chiller set point too low.
Symptom
Getting a message that the Bore Temperature is too low. Pop-up message stating that the bore temperature is too cool stays on the screen briefly, then goes away. Scanning is not paused.
Error message
2225686 The bore temperature reading is low. Error: 2225686 Host: LXMR Process: NSP File: HPC PORT ID:spi bore wall temp mon Line: 400 The bore temperature reading is low. Check for low room temperature, a short in the sensor, sensor cable, or connector, or a problem with the piggy-back amplifier board in the SRI.
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.