GE Healthcare · MRSigna22416051083061534
241605 PPBM Output Voltage (VRAIL) Monitoring Error Due to PPBM.
Symptom
Unable to scan with PPBM fault from Gradients. Unable to scan due to PPBM fault from Gradients.
Error message
2241605 PPBM Output Voltage (VRAIL) Monitoring Error. The PPBM Output Voltage has Exceeded the Allowed Range. Tue Apr 27 10:25:34 2004 2241605 2 rmnf NSP HPC_PORT_ID:GAP/GIP/GP 546 PPBM Output Voltage (VRAIL) Monitoring Error. The PPBM output voltage has exceeded the allowed range. Possible causes: GPM axis Main Board, PPBM, Output Shelf, or GIP. Low: 2.000V High: 200.000V Value: 1.181V Axis: X Standby/Ready State: R SR 349 1083061534 0 1 Tue Apr 27 10:25:34 2004 2241605 2 rmnf NSP HPC_PORT_ID:GAP/GIP/GP 546 PPBM Output Voltage (VRAIL) Monitoring Error. The PPBM output voltage has exceeded the allowed range. Possible causes: GPM axis Main Board, PPBM, Output Shelf, or GIP. Low: 2.000V High: 200.000V Value: 1.181V Axis: X Standby/Ready State: R EN 349
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Component
- 46-328206p22 CROWN Poly Phase Buck Module
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.