Unable to Reset Compact PDU CB1 80 Amp Main Breaker.
Symptom
Unable to Reset Compact PDU CB1 80 Amp Main Breaker See Long Description This is a mobile LX scanner that just pulled into this area. The mobile driver called for support because the Compact PDUs 80 Amp Main Breaker CB1 was tripped and would not reset. The FE was paged and went to the site and called the OLC for support. There are no faults LED's lit on the front panel of the Compact PDU. It won't reset in Auto or Manual mode. There is proper line voltage applied to the breaker but it won't mechanically engage even with no power applied to the PDU.
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Component
- 46-307819P86 PDU MAIN BREAKER (P89) 46-307819P89 ON-LINE 9000-279-01 CKT BREAKER KIT This is the 80 Amp Main Breaker CB1 for the Compact PDU. PDU MAIN BREAKER (P89) 46-307819P86, 46-307819P89 ON-LINE 9000-279-01 CKT BREAKER KIT . These are the notes from the P89 FLS - CIRCUIT BREAKER REPLACEMENT KIT, WHICH INCLUDES ADAPTING HARDWARE, MOUNTING BRACKET ANDINSTRUCTION. IF ORDERING FOR HORIZON LX, DISCARD HARDWARE, BRACKET AND INSTRUCTION. THE CIRCUIT BREAKER ALONE IS NOT AVAILABLE. REPLACES BOTH 46-307819P86 AND 46-307819P89,PER STEVE SCHWARZ AT ON-LINE POWER. MS7093.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.