GE Healthcare · CTLightSpeed
LightSpeed 3.X (Ultra, Plus, QX/i) - GOC2
Symptom
System fails to power up System fails power up
Error message
SCSI Error Report SCSI Status Unit not ready SCSI Error Report SCSI Status ... 02h sense key =2h (not ready) FRU= 02h dev md0 ASC/ASCQ Unit not ready. Dead 8:20 sector 6 Unable to read partition task Mounting Local filesytems (wrong fs type, bad option, bad superblocks on /dev/md0) failed Mounting Other filesystem; ((wrong fs type, bad option, bad superblocks on /dev/md0) failed During boot up sequence :SCSI Error Report SCSI Status ... 02h sense key =2h (not ready) FRU= 02h dev md0 .ASC/ASCQ Unit not ready. Dead 8:20 sector 6 Unable to read partition task Mounting Local filesytems (wrong fs type, bad option, bad superblocks on /dev/md0) failed Mounting Other filesystem; ((wrong fs type, bad option, bad superblocks on /dev/md0) failed. After few minutes, system comes up, but it takes longer next time is rebooted.
Applies to
- Models
- LightSpeed
- Product
- LightSpeed 3.X (Ultra, Plus, QX/i) - GOC2 This is HP CPU host running LINUX with Pegasus IG. 308L.8_H3.3M4 ~ 4 or 8 slice MDAS. ~ Could be an Ultra, Plus or QXi system. Must run swokinstall -p to verify. ~ See Long description for details . LightSpeed 3.X MDAS4 Gantry and GOC2 Gantry - 2281177-2, DAS - 2272768, Console – 2341104-2, Table - 2276776, PDU - 2269902 Links to the updated Product Service Manuals, FMIs, Service Notes, Option Manuals and Operator Documents can be found online at the attached sites. Always use the most appropriate documentation for your system.
- Software
- 308L.5 rel 308L.5_H3.3M4 LightSpeed LightSpeed ver 308L.5 rel 308L.5_H3.3M4 LightSpeed ver 308L.5 rel 308L.5_H3.3M4
- Area
- CT
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare CT issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required