GE Healthcare · MRSigna2238454
2238454 Power Module Poly Phase Buck Module Error due to failed power module.
Symptom
Will Not Scan with Gradient Errors.
Error message
2238454 % axis LOW 8645 Power Module Poly Phase Buck Module Error occurred. Sat Mar 22 12:56:57 2008 Error: 2238454 Host: GVRHMR01 Process: NSP File: HPC PORT ID:GAP/GIP/GP Line: 1038 Z axis LOW 8645 Power Module Poly Phase Buck Module Error occurred. Possible causes: high line volt. or overtemp. Wait a few minutes for cooling, then turn 8645 power off for 30 seconds to clear error. After 30 seconds, turn 8645 power back on. Try to scan. If Main Control Board LED is lit again, replace PPBM. Sat Mar 22 12:56:57 2008 Error: 2238454 Host: GVRHMR01 Process: NSP File: HPC PORT ID:GAP/GIP/GP Line: 1038 Z axis LOW 8645 Power Module Poly Phase Buck Module Error occurred. Possible causes: high line volt. or overtemp. Wait a few minutes for cooling, then turn 8645 power off for 30 seconds to clear error. After 30 seconds, turn 8645 power back on. Try to scan. If Main Control Board LED is lit again, replace PPBM.
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Component
- 46-328206P115 CROWN A10999-G2 8645 PWR MOD W/CROWB
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.