What is Philips CT error code X-RAY-DEFAULT-LOADED?

X-ray generator firmware upload completed successfully. It is reported by the Generator (Epsilon) on DuraDiagnost F30 AR CT systems. Severity: Info; subsystem: X-ray Generator (Epsilon).

What should a field engineer do about X-RAY-DEFAULT-LOADED?

No action required — despite the wording, this message does not mean the settings were reset: it confirms that the Epsilon PC Program successfully uploaded the X-ray firmware from the computer to the generator.. Isolate the X-ray Generator (Epsilon) subsystem and follow the status-code troubleshooting in the service manual. FSELIB documents the full diagnosis and remedy for the DuraDiagnost F30 AR.

InfoX-ray Generator (Epsilon)

X-RAY-DEFAULT-LOADED — X-ray generator firmware upload completed successfully

Philips CT error code, reported by the Generator (Epsilon).

What X-RAY-DEFAULT-LOADED means

On DuraDiagnost F30 AR CT systems, status code X-RAY-DEFAULT-LOADED indicates: X-ray generator firmware upload completed successfully. The code originates in the X-ray Generator (Epsilon) section of the Generator (Epsilon). Severity level info (Info).

Reported action: No action required — despite the wording, this message does not mean the settings were reset: it confirms that the Epsilon PC Program successfully uploaded the X-ray firmware from the computer to the generator..

From the "Messages to Operator and User" table in the Philips DuraDiagnost F30 AR Technical Manual (DMR294249 REV 04). Displayed on the operator console graphic screen of the Epsilon X-ray generator after an X-ray firmware upload made with the Epsilon PC Program. Not confirmed by this document for other Epsilon generator-based Philips systems.

Full troubleshooting for X-RAY-DEFAULT-LOADED

The complete diagnosis, cause tree, and step-by-step remedy for the X-ray Generator (Epsilon) subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related X-ray Generator (Epsilon) codes

TUBE-CURRENT-FAILUREX-ray tube current is out of tolerance TUBE-FIL-LIMITExposure technique exceeds the X-ray tube filament operating limit TUBE-HOUSING-OVERHEATTube housing overheated — exposure blocked until it cools TUBE-KV-LIMITSelected exam kV is beyond the X-ray tube's kV range TUBE-KW-LIMITExposure parameters exceed the X-ray tube's kW (power) rating WAITING-FIL-COOLGenerator is waiting for the filament to cool during tube calibration 10052Application error on the Eleva Workspot when the operating-software DVD is not removed E061ABeam1 X signal path error

Discuss X-RAY-DEFAULT-LOADED with other field engineers in the FSELIB forum

Source: Philips DuraDiagnost F30 AR Technical Manual (DMR294249 REV 04) — Messages to Operator and User table. Reference information re-authored by FSELIB — not a copy of the OEM manual.