Alarm — hardware faultSystem Memory

E2011 — Memory detected but not configurable — error during memory configuration

Philips CT error code, reported by the MND Extended Storage Server (Dell PowerEdge 2900 hardware).

What E2011 means

On Mobile Network Device (MND) Extended Storage Option CT systems, status code E2011 indicates: Memory detected but not configurable — error during memory configuration. The code originates in the System Memory section of the MND Extended Storage Server (Dell PowerEdge 2900 hardware). Severity level alarm (Alarm — hardware fault).

Reported action: See the Troubleshooting System Memory section (p.74) of the guide..

Listed as an LCD front-panel status/error code ('Mem Config Err', Table 2 LCD Status Messages, p.25).

Full troubleshooting for E2011

The complete diagnosis, cause tree, and step-by-step remedy for the System Memory subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related System Memory codes

E2010No memory is installed in the systemE2012Memory is configured but not usable — memory subsystem failureE201EBIOS POST memory test failureE2021Incorrect memory configuration — memory population order incorrectE2110Memory multi-bit error (MBE) on the implicated DIMM pairE2111BIOS disabled memory single-bit error (SBE) logging on the implicated DIMME2112BIOS spared a memory DIMM pair after determining it had too many errors10052Application error on the Eleva Workspot when the operating-software DVD is not removed
Discuss E2011 with other field engineers in the FSELIB forum

Source: Philips Mobile Network Device (MND) Extended Storage Option Troubleshooting Guide, Rev A — 4598 004 17081 (LCD Status Messages table). Reference information re-authored by FSELIB — not a copy of the OEM manual.