What is Philips CT error code E2010?

No memory is installed in the system. It is reported by the MND Extended Storage Server (Dell PowerEdge 2900 hardware) on Mobile Network Device (MND) Extended Storage Option CT systems. Severity: Alarm — critical, no boot memory; subsystem: System Memory.

What should a field engineer do about E2010?

Install memory — see Replacing the Memory Module in the PowerEdge 2900 Hardware Manual.. Isolate the System Memory subsystem and follow the status-code troubleshooting in the service manual. FSELIB documents the full diagnosis and remedy for the Mobile Network Device (MND) Extended Storage Option.

Alarm — critical, no boot memorySystem Memory

E2010 — No memory is installed in the system

Philips CT error code, reported by the MND Extended Storage Server (Dell PowerEdge 2900 hardware).

What E2010 means

On Mobile Network Device (MND) Extended Storage Option CT systems, status code E2010 indicates: No memory is installed in the system. The code originates in the System Memory section of the MND Extended Storage Server (Dell PowerEdge 2900 hardware). Severity level alarm-high (Alarm — critical, no boot memory).

Reported action: Install memory — see Replacing the Memory Module in the PowerEdge 2900 Hardware Manual..

Listed as an LCD front-panel status/error code ('No Memory', Table 2 LCD Status Messages, p.25).

Full troubleshooting for E2010

The complete diagnosis, cause tree, and step-by-step remedy for the System Memory subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related System Memory codes

E2011Memory detected but not configurable — error during memory configuration E2012Memory is configured but not usable — memory subsystem failure E201EBIOS POST memory test failure E2021Incorrect memory configuration — memory population order incorrect E2110Memory multi-bit error (MBE) on the implicated DIMM pair E2111BIOS disabled memory single-bit error (SBE) logging on the implicated DIMM E2112BIOS spared a memory DIMM pair after determining it had too many errors 10052Application error on the Eleva Workspot when the operating-software DVD is not removed

Discuss E2010 with other field engineers in the FSELIB forum

Source: Philips Mobile Network Device (MND) Extended Storage Option Troubleshooting Guide, Rev A — 4598 004 17081 (LCD Status Messages table). Reference information re-authored by FSELIB — not a copy of the OEM manual.