Alarm — critical, operation haltedProcessor (CPU)

E1414 — Microprocessor exceeded the acceptable temperature range and halted operation (Thermtrip)

Philips CT error code, reported by the MND Extended Storage Server (Dell PowerEdge 2900 hardware).

What E1414 means

On Mobile Network Device (MND) Extended Storage Option CT systems, status code E1414 indicates: Microprocessor exceeded the acceptable temperature range and halted operation (Thermtrip). The code originates in the Processor (CPU) section of the MND Extended Storage Server (Dell PowerEdge 2900 hardware). Severity level alarm-high (Alarm — critical, operation halted).

Reported action: If the problem persists, ensure the microprocessor heat sinks are properly installed (see Troubleshooting the Microprocessors, p.82). Per the guide, the LCD keeps showing this message until the power cord is disconnected/reconnected or the SEL is cleared via Server Assistant or the BMC Management Utility..

Listed as an LCD front-panel status/error code ('CPU # Thermtrip', Table 2 LCD Status Messages, p.21). '#' identifies the affected processor.

Full troubleshooting for E1414

The complete diagnosis, cause tree, and step-by-step remedy for the Processor (CPU) subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related Processor (CPU) codes

E1229Processor VCORE voltage regulator has failedE1410Microprocessor is reporting a system error (IERR)E1418Processor is missing or bad; system is in an unsupported configurationE141CProcessors are in a configuration unsupported by the manufacturerE141FSystem BIOS reported a processor protocol errorE1420System BIOS reported a processor bus parity errorE1421System BIOS reported a processor initialization errorE1422System BIOS reported a machine check error
Discuss E1414 with other field engineers in the FSELIB forum

Source: Philips Mobile Network Device (MND) Extended Storage Option Troubleshooting Guide, Rev A — 4598 004 17081 (LCD Status Messages table). Reference information re-authored by FSELIB — not a copy of the OEM manual.