Alarm — hardware faultProcessor (CPU)

E1410 — Microprocessor is reporting a system error (IERR)

Philips CT error code, reported by the MND Extended Storage Server (Dell PowerEdge 2900 hardware).

What E1410 means

On Mobile Network Device (MND) Extended Storage Option CT systems, status code E1410 indicates: Microprocessor is reporting a system error (IERR). The code originates in the Processor (CPU) section of the MND Extended Storage Server (Dell PowerEdge 2900 hardware). Severity level alarm (Alarm — hardware fault).

Reported action: Check the system's Information Update Tech Sheet at support.dell.com for the most current system information; if the problem persists, see Getting Help (p.10)..

Listed as an LCD front-panel status/error code ('CPU # IERR', Table 2 LCD Status Messages, p.20). '#' identifies the affected processor.

Full troubleshooting for E1410

The complete diagnosis, cause tree, and step-by-step remedy for the Processor (CPU) subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related Processor (CPU) codes

E1229Processor VCORE voltage regulator has failedE1414Microprocessor exceeded the acceptable temperature range and halted operation (Thermtrip)E1418Processor is missing or bad; system is in an unsupported configurationE141CProcessors are in a configuration unsupported by the manufacturerE141FSystem BIOS reported a processor protocol errorE1420System BIOS reported a processor bus parity errorE1421System BIOS reported a processor initialization errorE1422System BIOS reported a machine check error
Discuss E1410 with other field engineers in the FSELIB forum

Source: Philips Mobile Network Device (MND) Extended Storage Option Troubleshooting Guide, Rev A — 4598 004 17081 (LCD Status Messages table). Reference information re-authored by FSELIB — not a copy of the OEM manual.