Alarm — hardware faultProcessor (CPU)

E1229 — Processor VCORE voltage regulator has failed

Philips CT error code, reported by the MND Extended Storage Server (Dell PowerEdge 2900 hardware).

What E1229 means

On Mobile Network Device (MND) Extended Storage Option CT systems, status code E1229 indicates: Processor VCORE voltage regulator has failed. The code originates in the Processor (CPU) section of the MND Extended Storage Server (Dell PowerEdge 2900 hardware). Severity level alarm (Alarm — hardware fault).

Reported action: Guide gives no field-repair step beyond contacting support: see the 'Getting Help' section (p.10) of the guide..

Listed as an LCD front-panel status/error code ('CPU # VCORE', Table 2 LCD Status Messages, p.20) for the Dell PowerEdge 2900-based server hardware in the Philips MND Extended Storage Option Troubleshooting Guide (Rev A, 4598 004 17081). '#' identifies the affected processor.

Full troubleshooting for E1229

The complete diagnosis, cause tree, and step-by-step remedy for the Processor (CPU) subsystem are documented in the FSELIB Activion16 (TSX-031A) service manual — re-authored, web-first, with real figures.

Open the Activion16 service manual

Related Processor (CPU) codes

E1410Microprocessor is reporting a system error (IERR)E1414Microprocessor exceeded the acceptable temperature range and halted operation (Thermtrip)E1418Processor is missing or bad; system is in an unsupported configurationE141CProcessors are in a configuration unsupported by the manufacturerE141FSystem BIOS reported a processor protocol errorE1420System BIOS reported a processor bus parity errorE1421System BIOS reported a processor initialization errorE1422System BIOS reported a machine check error
Discuss E1229 with other field engineers in the FSELIB forum

Source: Philips Mobile Network Device (MND) Extended Storage Option Troubleshooting Guide, Rev A — 4598 004 17081 (LCD Status Messages table). Reference information re-authored by FSELIB — not a copy of the OEM manual.