GE Healthcare · MR
Patient Alarm squeeze ball is not working Due to No Power to Patient Alert Box.
Symptom
The Patient Alarm Box is not working and its light is out. The tech has unplugged and plugged the power back into the control box but it hasn't fixed the problem.
Applies to
- Product
- HF OpenSpeed HFO1 HFO2 and HFO3 Only.
- Software
- HFO3
- Component
- 46-317758P3 MAGNACOUSTICS 12V 60HZ POWER SUPPLY This is the AC adapter used to power the Patient Alarm Box. This is the AC adapter used to power the Patient Alarm Box.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.