GE Healthcare · MRSigna2225552
Unable to Scan with Multi Coil TR Driver Faults
Defective coil.
Symptom
Unable to Scan with Multi Coil TR Driver Faults
Error message
2225552 Multi-Coil T/R Driver Board Fault. An Open Circuit was Detected on Port 2. Thu Aug 21 12:06:10 1997 Suite: MRS1 Host: OC0 Proc: HPC_PORT_ID Error: 2225552 File: PMH.m 1.29 Method: spi_tr_mon Line: 6240 Multi-Coil T/R Driver Board Fault An open circuit was detected on port 2. Check cable to multi-coil board or check for an open pin diode.
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Component
- 2225545-6 USAI PREMIER 7000 PHASED ARRAY CTL SPINE COIL. M1087SP No special tuning is required after replacing the Adapter Block 2225545-9 of the M1087SP USAI PREMIER 7000 PHASED ARRAY CTL SPINE COIL 2225545-6.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.