GE Healthcare · MRExcite2248602
The PDU is in Stop Mode and the EMO Reset Will Not Work See Long Description Sometimes when you push the green…
PDU was in stop mode.
Symptom
The PDU is in Stop Mode and the EMO Reset Will Not Work See Long Description Sometimes when you push the green EMO reset button on the PDU nothing happens. You cannot hear the 24VDC relay click on nor hear any fans start up. In addition, you keep getting an error message that the PDU is in stop mode or the 24VDC supply has failed after you reset the TPS and attempt to scan.
Error message
2248602 PDU in Stop Mode. Emergency Stop button was pressed or PDU 24 Volt supply has failed. 2248602 PDU is in Stop mode. Emergency Stop button was pressed or PDU 24 Volt supply has failed.
Applies to
- Models
- Excite
- Product
- Excite HDx Includes "Excite HDi" system. 14.0 Software only.
- Software
- 14.0 For both Excite HDx and 3T Excite HDx systems.
- Component
- 2374930-2 Teal PDU Control PCB This part for use in 1.5T and 3T ACGD cabinets with part # 2284300.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.