Unable to Boot Octane Computer.
Defective Graphics Bd.
Symptom
Unable to Boot Octane Computer. Light Bar Immediately goes to Solid Red. No Output to Monitor See Long Description The light bar is never white, it immediately goes to solid red. One of the required LED's on the lower right front of the Octane I chassis was out: The upper right "PCI Chassis" LED was out, so FE replaced the PCI chassis. That LED came on after that but the original symptoms remained. FE replaced the Octane's System Module, Power Supply, & Front plane Module which didn't fix the problem. Initially when the FE installed the new Front plane Module, the light bar went white briefly, but then went red again and the original symptom returned (only red light bar).
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.