GE Healthcare · MR
Satcomm What do the LEDs on the Satellite Modem indicate.
Symptom
Satcomm What do the LEDs on the Satellite Modem indicate. How can they be used. LEDs on the Satellite modem can be used to visualize the modems ability to see satellites and if messages are being sent. This is a quick check that can be done without the use of the laptop.
Applies to
- Product
- Magnet Monitor SHeM Granite. Part Number: 2209000 and T3504DR Should be installed with FMI 60583, SIGNA MAGNET MONITOR PACEMAKER (FMI kit 2319197) 2282790 Pacemaker 2266628 Remote Alarm Box 2291548 Cable, Pacemaker to Magnet Monitor 2264859-2 Cable, Pacemaker to Remote Alarm Box Magnet Monitor Proprietary Software: 2252032-3 The following 2 manuals may be downloaded from http://3.87.118.28/optec3/common/magnets/magnets.htm LCC Magnet Mon. Hardware Install:2230681 LCC ProActive Software Install & T/S:2236995
- Software
- SHeM Proprietary Software 2.3.7. SHeM Proprietary Software 2.3.7 SHeM Proprietary Software 2.3.7.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.