GE Healthcare · MRSigna22416051083061534
241605 PPBM Output Voltage (VRAIL) Monitoring Error Due to PPBM.
Symptom
Unable to scan with PPBM fault from Gradients. Unable to scan due to PPBM fault from Gradients.
Error message
2241605 PPBM Output Voltage (VRAIL) Monitoring Error. The PPBM Output Voltage has Exceeded the Allowed Range. Tue Apr 27 10:25:34 2004 2241605 2 rmnf NSP HPC_PORT_ID:GAP/GIP/GP 546 PPBM Output Voltage (VRAIL) Monitoring Error. The PPBM output voltage has exceeded the allowed range. Possible causes: GPM axis Main Board, PPBM, Output Shelf, or GIP. Low: 2.000V High: 200.000V Value: 1.181V Axis: X Standby/Ready State: R SR 349 1083061534 0 1 Tue Apr 27 10:25:34 2004 2241605 2 rmnf NSP HPC_PORT_ID:GAP/GIP/GP 546 PPBM Output Voltage (VRAIL) Monitoring Error. The PPBM output voltage has exceeded the allowed range. Possible causes: GPM axis Main Board, PPBM, Output Shelf, or GIP. Low: 2.000V High: 200.000V Value: 1.181V Axis: X Standby/Ready State: R EN 349
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.