GE Healthcare · MRExcite30000
Install In Spec key generation fails due to false System Health failure.
Symptom
"Install_in_spec" Key Generation Fails.
Error message
B0 Image Tool not run in Head Mode Found in install_in_spec.log.bak. see long description. [insite@AMRIMR bin]$ more install_in_spec.log.bak Health Check "Version 1.0" run on Mon Aug 22 18:59:44 CDT 2005 System software revision = 12.0_M4_0520.a Operating System Version = 2.6.7-2.2smp Field Strength = 30000 Governing Body = fda2 Multi Coil = YES RF Amp type = 3.0T Astex RF Amp 35KW Grad Amp Type = HFD Gradients Magnet ramp polarity = pos Maximum Standard Receiver Bandwidth (kHz) = 250.0 Grad Coil type is: TRM SPT Analysis Results -------------------- All SPT Results in Spec! B0 Image Analysis Results ------------------------- Error: B0 Image Tool not run in Head Mode L Coil Analysis Results ----------------------- All L Coil Results in Spec! EPIWP Analysis Results ---------------------- All EPIWP Results in Spec! Coil Configuration Analysis Results ----------------------------------- All Coil Configuration Results in Spec! LV Shim Analysis Results ------------------------ All LV Shim Results in Spec! System Gain Analysis Results ---------------------------- System Gain Results in Spec! Gradcal Analysis Results ------------------------------------- Gradcal tests performed in whole m
Applies to
- Models
- Excite
- Product
- Excite Includes Excite 1 and Excite 2, 10.0, 11.0 and 11.1 Software.
- Software
- 11.0 Only for 1.5T Excite product. 12.0 is Excite HD and 14.0 is Excite HDx. Note, 3T Excite goes with software G3, not 11.0 or 11.1.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.