GE Healthcare · MR2240188
Cannot scan, getting Preamp Bias fault on one Coil..
Symptom
Cannot scan, getting Preamp Bias fault on one Coil.. Was able to scan with other coils, so issue isolated to a defective coil. Tried hard rebooting entire system and errors repeated with defective coil.
Error message
2240188 Pre amplifier bias error was occurred on 0 degree port. Host: oc001 Process: NSP File: HPC PORT ID:spi srp Line: 1142 Pre amplifier bias error was occurred on 0 degree port. It may be neccessory to change the pre-amplifier box.
Applies to
- Product
- Profile 3 Ultrasparc CPU with AN8290Y gradients
- Software
- Profile Contour 7.67 Applies to Profile1 through 4 and Contour1 through 4. This is the last revision of software for this product line. Requires 7.66 LFC. 7.67 is a patch.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.