GE Healthcare · MRExcite2252106
Both MGD power supplies were defective
Symptom
HP Linux Workstation Fails To Boot, Hangs At Do Not Interact Message
Error message
2252106 Diagnostic software error. Failed to determine hardware state for AGP, SCP board. The board may be busy loading vxWorks or may be hung. Also check the serial cable for the board and the serial terminal server. 2252106 Diagnostic software error. Failed to determine hardware state for AGP, SCP board. The board may be busy loading vxWorks or may be hung. Also check the serial cable for the board and the serial terminal server.
Applies to
- Models
- Excite
- Product
- Excite Includes Excite 1 and Excite 2, 10.0, 11.0 and 11.1 Software.
- Software
- 11.0 Only for 1.5T Excite product. 12.0 is Excite HD and 14.0 is Excite HDx. Note, 3T Excite goes with software G3, not 11.0 or 11.1.
- Component
- 2294300-8 MGD Power Supply ***OBSOLETE PART Case # 11430551*** See Long Description ***OBSOLETE PART Case # 11430551*** This part has been identified as technically obsolete and no short term solution has been identified. FE must identify and order a higher or lower level spare as required. Contact your support engineering, On-line Engineering or Parts ID team should you require support. 212012173 7-24-254 Suitable alternative part is 5181495-3. Please see latest appropriate FRU manual for product in question. 212002950 February 20, 2009.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.