GE Healthcare · MRExciteSigna2245053
Replace HFA CONTROL BOARD ASSEMBLY.
Symptom
Current distortion faults with no other fault present. May happen on one, two or three gradient axes at once.
Error message
2245053 GRADIENT DRIVER TESTS - X, Y or Z Axis Fault Occurred GP Reported a X,Y or Z Axis Current Distortion Fault. Check LCoil calibration. 2245053 "GRADIENT DRIVER TESTS - %c Axis Fault Occurred.\n\ GP reported a %c Axis Current Distortion Fault.\n\ Check LCoil calibration. Swap cables between SGA\n\ & GP to isolate if SGA or GP is the source of\n\ problem.\n\ 2245053 "GRADIENT DRIVER TESTS - %c Axis Fault Occurred. GP reported a %c Axis Current Distortion Fault. Check LCoil calibration. Swap cables between SGA & GP to isolate if SGA or GP is the source of problem.
Applies to
- Models
- Excite, Signa
- Product
- Excite HDx Includes "Excite HDi" system. 14.0 Software only.
- Software
- 14.0 For both Excite HDx and 3T Excite HDx systems.
- Component
- 2396050-2 HFA CONTROL BOARD ASSEMBLY
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.