GE Healthcare · CTLightSpeed
Power light is lit but no display on monitor / Replace defective LCD monitor.
Symptom
Power light is lit but no display on monitor.
Applies to
- Models
- LightSpeed
- Product
- LightSpeed 4.X - GRE See Long Description for detailed information - H2_P_M16 Product Name: LightSpeed 4.X with GRE Product Photographs GE HEALTHCARE Method of remote or software identification - See attachment below for a complete list of software commands and typical results 1. check_config 2 . swhwinfo “swhwinfo” will have the following switches: · -c or -classc = Outputs the Class C version, if installed, on the system · -m or -classm = Outputs the Class M version, if installed, on the system · -o or -os = Outputs the Operating System version installed on the system · -da or -date = Outputs the date and time the software was installed on the system (LFC) -h or –help = Outputs complete details about all the available switches associated with swhwinfo swhwinfo –c –m –o -da List of Supported Console types: GOC3 (GRE) GOC4 (GRE) List of software the product can run: 07MW11.10 SP2.0, SP3.0, SP3.1 FAQ's Table weight limit - 180 kg (400 lbs) normal operation - 205 kg (450 lbs) maximum allowed with decreased accuracy Tube type - D3186T D3186T(green) Current production - M4 Options - TBD Links to the updated Product Service Manuals, FMIs, Service Notes, Option Manuals and Operator Documents can be found online at the attached sites. Always use the most appropriate documentation for your system.
- Component
- 5117545 19 inch color LCD Monitor, NEC LCD1980SXi See Long Description for details 5117545 19 inch color LCD Monitor, NEC LCD1980SXi Part #: 5117545 Part Type: GP CONSUMABLE - RETURNABLE Part Weight: 0.00 LBR Repairable: No Returnable: Yes Hazardous Material: N Description: Monitor, 19 inch color LCD, silver, NEC LCD1980SXi FRU: Yes Status: Orderable Comments: 5/10/05 212001261 Shawn Fox When ordering this LCD monitor for a CT Systems (Cti,1x,2x,3x,4x lightSpeed) no need to order the video Kit. On a LS 2x console the old CRT monitors use a right angle cable (2256482) connector that will not adapt to the LCD (5117545). Order a 2295019 cable and it worked fine
- Area
- CT
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare CT issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required