GE Healthcare · MR
OrthoMRI Table switch is out of adjustment
Symptom
OrthoMRI Getting bed is unplugged message This error is typically the table in switch,which needs adjustment. Second cause is there will be a rut worn in the flooring allowing the table to roll off the switch. Sometimes there is a positioning pad, blanket or other obstruction either on the floor or around/under the coil locking mechanism or under the horseshoe part of the table which traverses in and out of the magnet.
Error message
OrthoMRI Unplugged bed error
Applies to
- Product
- OrthoMRI Escan XQ EscanXQ and EscanNE
- Software
- OrthoMRI S/W Release 9.1B. OrthoMRI S/W Release 9.1B.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.