GE Healthcare · CTHiSpeed182411
Elevation Motion was prohibited by hardware Interference switches.
Symptom
Table will not lower below 210 (+-5) mm as shown on Gantry Display. Table will move up and down above 210mm.
Error message
Error: 182411 Motion was prohibited by hardware Interference switches. See long Description for how to DECODE this error Fri Feb 24 21:59:29 2006 Error: 182411 Host: ETC Process: Elevation File: emcControl.c 1.23 11/13/92 Line: 170 Function: PATIENT ANATOMY POSITIONING : Elevation - Tilt Scan: 0/0/0 Type: None/Unknown Exception Level: Pri/Soft Time: 21:59:20:810 Log Series: 66 HW/SW error: Motion was prohibited by hardware Interference switches. Hardware Inhibit Switches 0xc0dc
Applies to
- Models
- HiSpeed
- Product
- HiSpeed CTi 6.X HiSpeed CTi 6.X with Octane and HSA Gantry HiSpeed CTi 6.X with Octane and HSA Gantry Links to the updated Product Service Manuals, FMIs, Service Notes, Option Manuals and Operator Documents can be found online at the attached sites. Always use the most appropriate documentation for your system.
- Software
- 6.1.19.1 for HiSpeed CT/i with with CT/I5 CONSOLE (Octane) - showprods returns Rhapsode Product 6.1.19.1 6.1.19.1 for HiSpeed CT/i with with CT/I5 CONSOLE (Octane) - showprods returns Rhapsode Product 6.1.19.1 6.1.19.1 for HiSpeed CT/i with with CT/I5 CONSOLE (Octane) - showprods returns Rhapsode Product 6.1.19.1
- Area
- CT
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare CT issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare CT issues
- Scanner Hardware Stopped Scan
- Patient Schedule fails to display some patients when updated.
- Ring artifact on axial images with no errors in logs.
- Scanner Hardware Stopped Scan.
- Both gantry controls are flashing and scanning hardware reset failed with SGI Indigo Console, HiSpeed Advantage Gantry
- Center Smudge Artifact.