GE Healthcare · MR2248652
Scan Inhibited Due To Gradient Cooling Unit Not Cooling Circulating Water.
Symptom
Will Not Scan With Patient Comfort Sensor Trip. See Long Description Patient comfort sensor trip; cannot scan due to bore sensor indicating temperature is too hot for patient safety. A message "Patient Comfort Sensor Trip" appears in the message box on the left side of the scan page at the start of autoprescan.
Error message
2248652 Scan inhibited. Patient comfort sensor trip. See Long Description Mon Apr 5 07:37:02 2004 Error: 2248652 Host: lxmr3 Process: NSP File: SCP:BoreTempSriHWO Line: 999 Scan inhibited. Patient comfort sensor trip. To return to scanning, verify: 1. Patient fan is ON. 2. Scan room temperature is normal. 3. Air flow through the bore is unobstructed. 4. Gradient Cooling fan is normal. 5. BRM heat exchanger is normal. Extended Error: The bore temp that was measured by the SRI has reached the second trip level. Subsequent scans will not be allowed. If the bore temperature is not high, this could indicate a problem with the bore temperature sensor cable or the SRI. Please make sure that the bore temperature sensor cable is connected to the SRI and that it is positioned correctly in the bore. Possible cause(s): Bore Temp Sensor, SRI
Applies to
- Product
- 3T Eclipse For E2 software
- Software
- VH3 3T VH3
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Patient comfort sensor trip Due to Gradient Cooling Problem.
- Will Not Scan With Patient Comfort Sensor Trip Due to Scan room temperature was warmer than normal.
- Will Not Scan With Patient Comfort Sensor Trip Due to Scan room temperature was warmer than normal.
- How to get the Current Bore Temperature Readings.
- Patient comfort sensor trip Due to Gradient Cooling Problem.
- E02 error on Airsys Medicool Chiller and Patient Comfort Sensor trip errors.2248652 caused by low coolant level in chiller.Will Not Scan With Patient Comfort Sensor Trip.Add Gradient Coolant.Signa HDx…