GE Healthcare · MR
MOBILE Satcomm Satcomm.cfg file Needs to be 16 Bytes long.
Symptom
MOBILE Satcomm Serial link issues between the SHeM and Satellite Modem. The MOBILE Satcomm Serial link is having issues between the SHeM and the Satellite Modem.
Error message
Satcomm Unable to read system ID error in the sc_events.log. more out the /shem/logs/sc_events.log to check for errors. In this case the system could not read the system ID in the /shem/config/satcomm.cfg file. more /shem/logs/sc_events.log
Applies to
- Product
- Magnet Monitor SHeM Granite. Part Number: 2209000 and T3504DR Should be installed with FMI 60583, SIGNA MAGNET MONITOR PACEMAKER (FMI kit 2319197) 2282790 Pacemaker 2266628 Remote Alarm Box 2291548 Cable, Pacemaker to Magnet Monitor 2264859-2 Cable, Pacemaker to Remote Alarm Box Magnet Monitor Proprietary Software: 2252032-3 The following 2 manuals may be downloaded from http://3.87.118.28/optec3/common/magnets/magnets.htm LCC Magnet Mon. Hardware Install:2230681 LCC ProActive Software Install & T/S:2236995
- Software
- SHeM Proprietary Software 2.3.7. SHeM Proprietary Software 2.3.7 SHeM Proprietary Software 2.3.7.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.