GE Healthcare · MR2194003

Sumitomo Cold Head and Gasket Kit 2194003-2

Symptom

SecondOpinion Part Number 2194003-2 Sumitomo Cold Head and Gasket Kit Issue Description: This part has been identified as one requiring second opinion approval before ordering due to one or more of the following reasons. High usage, High NDF, High cost, High demand but low consumption, difficult to isolate. See resolution concept for steps to perform before ordering this part.

Applies to

Product
Magnet HFO. Software Version Concept should NOT be selected for Magnet Products Serial # (Txxx) Field strength: 0.7 T He Vessel Pressure >0.9 psig but <6.25 psig Shield Temp for Cryo-cooler coldhead < 40 K Temp for Shield-cooler Coldhead < 35 K Cryocooler 2nd stage Temp > 3.8K but < 4.5K Recondenser Temp > 4.2K but < 4.6K Delta Temp (Coldhead - Recondensor) < 0 but < 0.3K Min. LHe Fill Level 75% of total vessel Min. LHe Ramp Level 100% Helium Volume 340 Liters Burst Disk 2253802-2 Baffle Assy 2226764
Software
HFO3
Component
SecondOpinion Part Number 2194003-2 Sumitomo Cold Head and Gasket Kit. See comments in resolution concept for second opinion requirements before ordering this part. See comments in resolution concept for second opinion requirements before ordering this part.
Area
MR

Full cause & step-by-step resolution

The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.

Start free trialSign in

7-day free trial · no credit card required

Related GE Healthcare MR issues