GE Healthcare · MR
OrthoMRI The RIB module is not working OrthoMRI Automatic Coil ID Fails LNR9102451001 Rib module replaced OrthoMRI Escan…
OrthoMRI The RIB module is not working OrthoMRI Automatic Coil ID Fails LNR9102451001 Rib module replaced OrthoMRI Escan OrthoMRI 9.1b
Symptom
OrthoMRI Automatic Coil ID Fails. Ortho MRI The customer cannot scan because the coil the type of coil being used is not recognized by the system. OrthoMRI The customer cannot scan because the coil the type of coil being used is not recognized by the system.
Error message
OrthoMRI Unknown Coil Error The system does not recognize the coil that is plugged in for use. The high failure part is the coil cable. If this error occurs on more than one coil, the mechanical swing arm cables is the next high failure part.
Applies to
- Product
- OrthoMRI E-Scan (Windows) NE
- Software
- OrthoMRI 9.1b revision software.
- Component
- OrthoMRI LNR9102451001 Rib module
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.