Infinia service manual instructions for the gantry position during Radial IN/OUT Motor Gear and Brake Replacem…
Infinia service manual instructions for the gantry position during Radial IN/OUT Motor Gear and Brake Replacement procedure is not clear.
Symptom
Infinia service manual instructions for the gantry position during Radial IN/OUT Motor Gear and Brake Replacement procedure is not clear. Reference, Infinia II System Service Manual Direction 2411012-100 section 12.6.1 Radial IN/OUT Motor Gear and Brake Replacement, Step 2. Set the Gantry in Radial H-Mode. It is not clear what rotation angle the detectors should be placed. Contributor 212010832 Oheim March 20, 2007
Applies to
- Models
- Infinia
- Product
- Infinia II Infinia II Acquisition System
- Component
- *Gantry Gantry Gantry
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- Service Note 43783_1 Feb/08 Infinia/Ventri/Xeleris 1.1 & 2
- After software upgrade FMI40786, the Infinia application does not automatically start on boot up
- I need the product data sheet on catalog E4500AK x-ray in use warning light interface control panel for Infinia
- Infinia Does not recognize collimator is mounted to detector, not reading collimator ID correctly.
- Where do I obtain the Non-Linear Correction tables for a VG/Infinia Hawkeye system if can't find the CD that came with the DAS assembly?
- Hawkeye CT scan Ring (Circular) artifacts in X-ray images appearing in the same radius in all of the images.