GE Healthcare · MRSigna2225763
Can Not Scan Due To Analogic RF Amplifier 2 Voltage Standing Wave Ratio or VSWR Faults.
Symptom
Will Not Scan With RF Errors Will not scan with RF errors
Error message
2225763 Analogic RF Amplifier 2 Voltage Standing Wave Ratio (VSWR) Fault 2225763 Analogic RF Amplifier 2 Voltage Standing Wave Ratio (VSWR) Fault. Analogic RF Amplifier 2 reflected power exceeds 2250W. Possible causes: disconnected or defective output cable from RF Amplifier 2 to RF Interface (RFI), defective RFI or RF Amp 2.->
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Component
- 2224562-2 1.5T RF AMP POWER MODULE W/ FRU PKG (SRFD)
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.