Large Pinch Sensor at Front of Magnet was Activated.
Symptom
How to construct and apply a Pinch Sensor defeater plug There's no part number to order a pinch sensor defeater plug, you have to build your own if you want one. It's not easy to find the directions and parts list to build and use a defeater plug for troubleshooting pinch sensor problems on HFO magnet enclosures. There's an error in the Magnet I/F Troubleshooting docs that describe the process. In one place 5 ohm resistors are specified and in another, 5k ohm. Actually, only 5k ohm resistors are used. PQR 13058327 & 13058328 submitted.
Error message
UUUU UUUU on Magnet Display
Applies to
- Product
- HF OpenSpeed HFO1 HFO2 and HFO3 Only.
- Software
- HFO3
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.