GE Healthcare · Nuclear MedicineInfinia
Infinia gives Error 105 while moving radial motion out direction by RCU for patient positionig prior to seeing…
Infinia gives Error 105 while moving radial motion out direction by RCU for patient positionig prior to seeing "Press GO to start" on GDU while displaying "Not Ready"
Symptom
Infinia gives Error 105 while moving radial motion out direction by RCU for patient positionig prior to seeing "Press GO to start" on GDU while displaying "Not Ready"
Error message
Error #105 (Error 105) Release Emergency Unit Failure ERROR_HVG_DETAILED:.:Gantry error 105.:.:Gantry error 105 Error #105 (Error 105) Release Emergency Unit Failure ERROR_HVG_DETAILED:.:Gantry error 105.:.:Gantry error 105
Applies to
- Models
- Infinia
- Product
- Infinia II Infinia II Acquisition System
- Software
- Infinia II 2.005.005.5 (2.55) Infinia II 2.005.005.5 (2.55) Infinia II 2.005.005.5 (2.55)
- Component
- *Gantry Gantry Gantry
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- Service Note 43783_1 Feb/08 Infinia/Ventri/Xeleris 1.1 & 2
- After software upgrade FMI40786, the Infinia application does not automatically start on boot up
- I need the product data sheet on catalog E4500AK x-ray in use warning light interface control panel for Infinia
- Infinia Does not recognize collimator is mounted to detector, not reading collimator ID correctly.
- Where do I obtain the Non-Linear Correction tables for a VG/Infinia Hawkeye system if can't find the CD that came with the DAS assembly?
- Hawkeye CT scan Ring (Circular) artifacts in X-ray images appearing in the same radius in all of the images.