Octane II Light bar Flashing Red, Nothing Displayed and Can't Boot
Symptom
Octane II Light bar Flashing Red Nothing Displayed and Can't Boot When replacing the Octane II computer, the FE installed the hard drives and System ID module over from the old computer, then FE powered the new Octane II computer up and was unable to boot. There is nothing displayed on the monitor, and the Octane II computer's lightbar started white, then changed to flashing red, and stays flashing red and nothing else happens. When replacing the Octane II computer, the FE swapped the hard drives and System ID module over from the old computer, then the FE powered the new Octane II computer up and was unable to boot. There is nothing displayed on the monitor, and the Octane II computer's lightbar started white, then changed to flashing red, and stays flashing red and nothing else happens.
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.