HSA RP 2.X HiSpeed Advantage
Symptom
How To add a default route on a Genesis Console. See Long Description for Details. How To add a default route on a Genesis Console. A site may require a default route and/or a static route set up on the system when it is necessary for the CT system to network images to remote host(s) that is not located within the local sub-net that the CT resides on. While there can only be one "Default Route" defined on the CT system, there can be many "Static Routes" defined as necessary. Static Routes are limited network routes specified for a particular IP address or a range of IP addresses. In the event that there is no static route defined for a given address or range of addresses (and the address is not in the local sub-net), the Default Route will be the one that is used. If there are no static routes defined, the Default Route would be the only route out of the subnet.
Applies to
- Models
- HiSpeed
- Product
- HSA RP 2.X HiSpeed Advantage HiSpeed Advantage RP 2.X HiSpeed Advantage RP 2.X FMI 25247 HSA/RP 2.5 Y2K Upgrade Special Tools Links to the updated Product Service Manuals, FMIs, Service Notes, Option Manuals and Operator Documents can be found online at the attached sites. Always use the most appropriate documentation for your system.
- Software
- 2.5 for HSA RP with Genesis Console and Computer assemblies 2.5 for HSA RP with Genesis Console and Computer assemblies The following is from FMI 25247 HSA/RP 2.5 Y2K Upgrade
- Area
- CT
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare CT issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required