GE Healthcare · MR2248664225380110259922238172248683
TPS or MGD Reset Fails With MDS Link Errors
Symptom
TPS or MGD Reset Fails With MDS Link Errors
Error message
2248664 MDS link failure. An MDS device failed to respond to SCP. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. 2248664 lx-mr3 NSP SCP:MdsAutoConfig 1731 MDS link failure. An MDS device failed to respond to SCP. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. MDS timer: 0x0000 Transmitted header: 0x11 SSM Transmitted opcode: 0x01-> 2253801 The MDS Link test was not able to finish due to link failures. Only 30 of 40 data packets (255 bytes each) were transmitted and received with no errors. 2253801 lx-mr3 diagCoord MdsLinktest.c 159 Diagnostic: MDS Loop Test Iteration: 1 of 1 Action: 1 Task ID: 0x3d5c638 Time: 102599 Object: SCP Test Task MDS LINK The MDS Link test was not able to finish due to link failures. Only 30 of 40 data packets (255 bytes each) were transmitted and received with no errors. Rerun the MDS link diags.-> 2223817 TPS is Not Responding. Please Reset TPS Wed Apr 28 16:58:01 2004 Error: 2223817 Host: GEMS Process: NSP File: TardisReset.cc Line: 398 TPS is not responding. Please reset TPS. 2248683 MDS Configuration Failed. MDS link errors caused the configuratio
Applies to
- Product
- Open Speed with EXCITE For HFO4 and HFO5 only
- Software
- OPENMR5-HFO5 Open Speed with Excite Product
- Component
- 2248992-7 GP2 ASSEMBLY FOR ACGD-LITE FOR HFO4 FRU PACKAGING Part is compatible with HFO4 and HFO5 systems
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA ID104088. Unable to Download or Reset The TPS MGD or ISE.
- CWA ID105421 PDU in Stop Mode and TPS Download failure.
- New 3T with Excite installation.
- Fiber optic cable at the rear of the SSM was loose causing intermittent MDS link errors.
- MDS Link Errors Due to Gradient Processor.
- Application Software does not complete the boot process with TPS Download failure Due to Idle Overnight With Power On.