GE Healthcare · MRSigna222573722257392225738

Will Not Scan Due to RF Errors 2225737 2225738 and 2225739

Symptom

Will Not Scan With RF Errors Will not scan with RF errors

Error message

2225737 Power Monitor 1 Fault. RF Transmit power has reached safety limit allowed for scan parameters and patient weight. Thu Mar 7 16:22:41 2002 2225737 2 lx-mr NSP HPC_PORT_ID:spi_pm_log_error 100 Power Monitor 1 Fault. RF Transmit power has reached safety limit allowed for scan parameters and patient weight. Check patient weight entered. amplitude: 40 pulse width: 33 duty cycle: 03 Fault in head amplitude. If you need to confirm the source of the fault, reset the power monitor and repeat the scan. This could also occur when power cycling SSM.> Thu Mar 7 16:22:41 2002 2225737 2 lx-mr NSP HPC_PORT_ID:spi_pm_log_error 100 Power Monitor 1 Fault.RF Transmit power has reached safety limit allowed for scan parameters and patient weight. Check patient weight entered. amplitude: 40 pulse width: 33 duty cycle: 03 Fault in head amplitude.If you need to confirm the source of the fault, reset the power monitor and repeat the scan. This could also occur when power cycling SSM.>

2225739 RF Interface (RFI) High Voltage Relay Fault. Thu Mar 7 16:22:42 2002 2225739 2 lx-mr NSP HPC_PORT_ID:spi_rf_mon 3066 RF Interface (RFI) High Voltage Relay Fault. Possible causes: RF Monitor Cable to System Sup

Applies to

Models
Signa
Product
Signa LX Signa LX Product can be used with 8.x and 9.x systems.
Software
9.1 For Signa LX product only
Area
MR

Full cause & step-by-step resolution

The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.

Start free trialSign in

7-day free trial · no credit card required

Related GE Healthcare MR issues