GE Healthcare · MRSigna
How to reboot the SHeM *NOTE: Improperly powering down this unit may result in Software Corruption.
How to reboot the SHeM
Symptom
How to reboot the SHeM *NOTE: Improperly powering down this unit may result in Software Corruption.
Applies to
- Models
- Signa
- Product
- Magnet Monitor SHeM Granite. Part Number: 2209000 and T3504DR Should be installed with FMI 60583, SIGNA MAGNET MONITOR PACEMAKER (FMI kit 2319197) 2282790 Pacemaker 2266628 Remote Alarm Box 2291548 Cable, Pacemaker to Magnet Monitor 2264859-2 Cable, Pacemaker to Remote Alarm Box Magnet Monitor Proprietary Software: 2252032-3 The following 2 manuals may be downloaded from http://3.87.118.28/optec3/common/magnets/magnets.htm LCC Magnet Mon. Hardware Install:2230681 LCC ProActive Software Install & T/S:2236995
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.