GE Healthcare · MRSigna2225734
Scan keeps stopping in the middle of scanning Due to RFI Gain and Phase Balance
Symptom
Scan Stops in Middle of Scans See Long Description Hard failure during scanning, APS works ok, AP recon error watching APS window.
Error message
2225734 RF Interface (RFI) Mismatch Fault. The Dump Resistor in the RFI has overheated. 2225734 "RF Interface (RFI) Mismatch Fault. The Dump Resistor in the RFI has overheated. Possible causes: improper calibration, missing or improper cables between RFI and amplifier(s), defective RFI or defective Analogic RF Amplifier(s).
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.