LightSpeed 3.X (Ultra, Plus, QXi) - Octane

Symptom

Applies to

Models

LightSpeed

Product

LightSpeed 3.X (Ultra, Plus, QX/i) - Octane Always 4 or 8 slice MDAS 308i.2_H3.1M5 LightSpeed 3.X - Octane Method of visual identification Method of remote or software identification - See attachment below for a complete list of software commands and typical results. check_config List of Supported Console Types Octane with Pegasus Recon hardware. List of softwares the product can run 308I.2_H3.1M5 305.4_H3.1M4 - obsolete 303.1_H3M4 - obsolete FAQ's Table weight limit - Up to 400 lb. (180 kg) with ± .25 mm positional accuracy. 450Ib (205 kg) max weight Tube type - D3186T Current production details - See Technical Reference Manual found on the Common Document Library Tips and workarounds, where to find it - Common Document Library(CDL) . Search for the latest FMI software release. In the furnished materials will be the list of various manuals with part numbers for the various languages. Example: English versions 2211223-100 Options - TBD Links to the updated Product Service Manuals, FMIs, Service Notes, Option Manuals and Operator Documents can be found online at the attached sites. Always use the most appropriate documentation for your system.

Component

2169940-13 System Module for Octane Computer, without CPU & DIMMs 2169940-13 System Module in Octane Computer, without CPU or DIMMS SPARE PCA IP30 SYSTEM BOARD Part #: 2169940-13 Part Type: GP REPAIRABLES Part Weight: 2.27 LBR Repairable: Yes Returnable: Yes Hazardous Material: N Description: SPARE PCA IP30 SYSTEM BOARD WITHOUT CPU & DIMMS FRU: Yes Comments: FLS - IP 30 PCB R10K U/O OCTANE SYSTEMS MS5500 6/21/01 2169940-13 IS NOT FORWARD COM-PATIBLE TO 2169940-45 SGI NUMBER 030-0887-005 CHECK LABEL ON BOARD TO DETERMINE YOUR BOARD TYPE. IF SYSTEM CAN BE BROUGHT UP TOCOMMAND MONITOR, THE SYSTEM WILL LIST IP30 BOARD TYPE. IF SYSTEM CAN BE BROUGHT UP TOIRIX, THE HINV -M COMMAND WILL LIST IP30 BOARD TYPE. IF SGI VENDOR PART NUMBER ON YOUR BOARD IS 030-1467-001, YOU MUST ORDER T3202KR !!!! THE T3202KT IS COMPATIBLE WITH ALL CPU TYPES (10K, 12K, SINGLE OR DUAL). IT WILL NOT WORK WITH 4K MEMORY DIMMS 6/20/01 - T3202KT C2R COMPLETEMS12464 2169940-13 ip 30 system board in the Octane Computer 2169940-13 IS NOT FORWARD COMPATIBLE TO 2169940-45 SGI NUMBER 030-0887-005 CHECK LABEL ON BOARD TO DETERMINE YOUR BOARD TYPE. IF SYSTEM CAN BE BROUGHT UP TO COMMAND MONITOR, THE SYSTEM WILL LIST IP30 BOARD TYPE. IF SYSTEM CAN BE BROUGHT UP TO IRIX, THE HINV -M COMMAND WILL LIST IP30 BOARD TYPE. IF SGI VENDOR PART NUMBER ON YOUR BOARD IS 030-1467-001, YOU MUST ORDER T3202KR !!!! THE T3202KT IS COMPATIBLE WITH ALL CPU TYPES (10K, 12K, SING LE OR DUAL). IT WILL NOT WORK WITH 4K MEMORY DIMMS ** REPAIR OPERATIONS SERVICE TIP ** 2169940-13 SGI OCTANE IP30 Module WARNING for CT Systems: When powering up the Octane, it may be necessary to press the “POWER” Button on the OCTANE front panel. The “POWER” button is behind the door, just above the lightbar. This module is used on CT and MR systems which use the Silicon Graphics OCTANE computer. This module, SGI number 030-0887 will NOT support the 4K type of memory . Refer to appropriate documentation to verify the type of memory that you have. ALWAYS UNPLUG INPUT POWER CORD to the OCTANE computer before removing any component. COMPRESSION CONNECTORS : Compression (XIO) connectors J11 and J24 are EXTREMELY SENSITIVE ! Do not touch them. ALWAYS install the caps. Clean with compressed air only. PREPPING the IP30 Module : CPU: Transfer CPU Module from original IP30 to the replacement. DO NOT loosen the allen heat sink screws! Loosen (4) mounting screws on SINGLE CPU, or loosen (6) mounting screws on DUAL CPU. MEMORY: Transfer MEMORY from original IP30 Module. Each 2 DIMM bank MUST be of the same capacity and type. Place the HIGHEST capacity bank in S1 and S2. Place remaining banks in order of DECREASING density in Slots S3/S4, S5/S6, and so on. Install the memory DIMM retaining bracket. It is NOT necessary to exchange U39 NVRAM with your unit. It will auto update the first time system is powered up. All license information is keyed to the “NIC” system identification module located on the “Frontplane”. Assure all fans and the air intake vents on the top of the OCTANE are free of dust. Dusty connectors WILL cause system to fail. Make sure that the Frontplane connectors are free of dust. Use compressed air to clean if necessary. INSTALLATION: Verify that the power cord has been unplugged from the OCTANE! Remove the compression connector caps. With the locking bars slid fully out, carefully slide the IP30 Module into the OCTANE until it is firmly seated. Push the sliding handles in until they contact the OCTANE frame. TIGHTEN THE SCREW IN EACH HANDLE (do not over tighten!) . Connect the cables to the IP30 Module. Reconnect the OCTANE system power cord. Turn system on using POWER button on the Octane front panel. Button is behind the door, just above the light bar. View PRIMARY display screen for error messages (i.e. “no keyboard”) and correct as required. Use “hinv” to verify correct memory and hardware. NOTE: If error messages indicate problems communicating with PCI cage (Xbow) or Graphics, it may be necessary to remove, clean dust from connectors, and reinstall subassemblies. (i.e. remove clean PCI cage connectors and mating connectors on Frontplane, and reinstall PCI cage)

Area

CT

Related GE Healthcare CT issues

• LightSpeed 4.X - GRE
• Phantom Holder is bent, broken, cracked, or damaged
• LightSpeed 3.X (Ultra, Plus, QX/i) - GOC2
• LightSpeed 5.X (60kW)
• LightSpeed 5.X (60kW)
• Keyboard is not typing the characters correctly