GE Healthcare · MR
Profile Application Software Fails to Boot.
Symptom
Profile and Contour Application Software Fails to Boot. Profile Application Software Fails to Boot.
Error message
Warning: can't change permission /export/sdc/logfiles/inst_startlog
Applies to
- Product
- Profile 3 Ultrasparc CPU with AN8290Y gradients
- Software
- 7.7x Profile3 through 4, Contour3 through 4
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.