GE Healthcare · CTHiSpeed1839042601072162120038791839212884850389
Gantry will not rotate
Symptom
Gantry will not rotate
Error message
Error: 183904 Axial VELOCITY Failure See LD for complete error Tue Nov 29 06:09:07 2005 Error: 183904 Suite: CT01 Host: STC Process: Axial File: ax_error.c Method: No Method Line: 1114 Function: AXIAL CONTROL : Axial Servo Control Loop Scan: 185/2/1 Type: Helical Exception Level: Pri/Most Severe Time: 06:09:07:375 Log Series: 293 Axial VELOCITY Failure. Mon Feb 4 07:19:11 2008 Error: 260107216 Host: tgp Process: tgp_subsys File: amc_mon.c Line: 1231 Mon Feb 4 07:19:11 2008 Host : Table Gantry Processor Ermes # : 260107216 Exception Class : Abort Severity : Primary File : amc_mon.c Line# : 1231 Function : AXIAL CONTROL : Axial Control Scan Type : None/Unknown Scan: 0/0/0 Axial Motor Control (AMC) Logic detected Gantry (Axial) VELOCITY Failure. Measured: 0.519 sec/rev Commanded: 0.500 sec/rev HW/SW Error: Retry Rx to verify probable gantry hardware problem. 212003879 02/04/2008 12:48 GMT Error: 183921 Axial conditions at FAULT: See Long Description for complete error Mon Oct 17 08:26:48 2005 Error: 183921 Suite: SMCT Host: STC Process: Axial File: ax_error.c Method: No Method Line: 1114 Function: AXIAL CONTROL : Axial Servo Control Loop Scan: 28848/2/1 Type: Helical Exception Level:
Applies to
- Models
- HiSpeed
- Product
- HiSpeed CTi 6.X HiSpeed CTi 6.X with Octane and HSA Gantry HiSpeed CTi 6.X with Octane and HSA Gantry Links to the updated Product Service Manuals, FMIs, Service Notes, Option Manuals and Operator Documents can be found online at the attached sites. Always use the most appropriate documentation for your system.
- Component
- 46-327176G2 Axial Drive Motor used on HSA, CTi and 1.X (Large) LightSpeed gantry - NOT for 2.X or newer See Long Description for info and picture 46-327176G2 Axial Drive Motor used on HSA, CTi and 1.X (Large) LightSpeed gantry - NOT for 2.X or newer Part #: 46-327176G2 Part Type: GP REPAIRABLES Part Weight: 68.63 LBR Repairable: Yes Returnable: Yes Hazardous Material: N Description: AXIAL DRIVE MOTOR W/EMC FILTER PLUG FRU: Yes Status: Orderable FLS - FE: PLEASE READ SERVICE NOTE # 1356 REGARDING BRUSH REPLACEMENT. BRUSH PART NO. IS2102012. MBELL 11/94 ---------------------------------------------------- 4/2/03- PEERLESS CAN NO LONGERSUPPLY. PULLY HUB IS NO LONGER AVAILABLE PER BONNIE O'CONNOR. MS12464 3/2004- PEERLESS CAN BUILD IF WE SUPPLY PULLEY HUB TO THEM (P/N 46-296157P1), AS BDIREQUIRES 100 PC MIN BUY. MS12464 INFO FOR POOL BUILD: PCN # 161803 CHANGED FRU LEVEL FROM 46-296158P1 (MOTOR ONLY) TO 46-327176G2 (MOTOR + PULLEY). PCN 189289 46-327176G1 REPLACED BY G2 PERPCN 189289. MS4636 2/9/95
- Area
- CT
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare CT issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required