Will Not Scan with Gradient Errors

Symptom

Error message

2241545 The GIP reported a second Long Overload on the X Axis of the GPM. Tue Apr 20 20:24:34 2004 Error: 2241545 Host: lx-mr Process: NSP File: HPC_PORT_ID:GAP/GIP/GP Line: 653 The GIP reported a second Long Overload on the X Axis of the GPM. Power cycle the main breaker on GPM Power Supply to recover from this condition. If this fault occurs again, swap the GPM axis. Run diagnostics.

2241523 The GIP Reported a Long Overload Fault on the X Axis of the GPM. Tue Apr 20 20:24:33 2004 Error: 2241523 Host: lx-mr Process: NSP File: HPC_PORT_ID:GAP/GIP/GP Line: 2324 The GIP reported a Long Overload Fault on the X Axis of the GPM. Possible causes: X Axis GPM. Try swapping the GPM Axis connections to isolate the problem.->

2241517 The GIP reported a Transistor Fault on the X Axis of the GPM. This Fault Could be Related to Noise. Tue Apr 20 20:24:32 2004 Error: 2241517 Host: lx-mr Process: NSP File: HPC_PORT_ID:GAP/GIP/GP Line: 2218 The GIP reported a Transistor Fault on the X Axis of the GPM. This fault could be related to noise. Possible causes: Cable between the GIP and GPM, X Axis GPM Main Board or Output Shelf.->

2241537 The X Axis of the GPM failed to go to Ready when Commanded. Tu

Applies to

Models

Signa

Product

Signa LX Signa LX Product can be used with 8.x and 9.x systems.

Software

8.3 8.3

Component

2151183 GRADIENT POWER MODULE For SGD. 8651 Is SGD Hi-Slew Gradient Power Module.

Area

MR

Related GE Healthcare MR issues

• CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
• CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
• CWA How to Change Exam Number from Remote Tools.
• Known Software issue with 15M4B coding error.
• Unable to Send Images to the PACS Due to PACS is down.
• U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.