GE Healthcare · CTLightSpeed
LightSpeed 5.X (60kW)
Symptom
Using press to talk button on scim does not allow talking to patient on intercom. See Long Description for more information. Using press to talk button on scim does not allow talking to patient on intercom The problem is , I can hear sound from patient to scan room but can not talk to patient due to talk switch on SCIM not response. When I pressed this switch ,I still hear the sound from gantry room at SCIM. Autovoice is OK.No problem
Applies to
- Models
- LightSpeed
- Product
- LightSpeed 5.X (60kW) LightSpeed 5.X (60kW) ~ Use with MDAS or GDAS HP_P_G4 HP_P_G8 HP_P_G16 HP_P_M16 LightSpeed 5.X 60KW G-DAS16 with GRE Links to the updated Product Service Manuals, FMIs, Service Notes, Option Manuals and Operator Documents can be found online at the attached sites. Always use the most appropriate documentation for your system.
- Component
- 2323942 SCIM to Intercom/Prescribed Tilt board cable - HD50 TO HD50 See LD for more info Part# 2323942 SCIM to Intercom/Prescribed Tilt board cable - HD50 TO HD50 This part is used on GOC1, GOC2, GOC3, GOC4 but is NOT USED ON CTI console Part #: 2323942 Part Type: GP CONSUMABLES Part Weight: 0.74 LBR Repairable: No Returnable: No Hazardous Material: N Description: CABLE, VME TO SCIM, HD50 FRU: Yes Comments: FLS - CABLE HD50 TO HD50. ADDED PER PCN 220438. REPLACES P/N 2262158-9 BECAUSE THIS CABLE FAILED OATS EMC VALIDATION ON M3. ADDED BY MS20544, CSV ON 4/11/02.
- Area
- CT
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare CT issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required