GE Healthcare · MRSigna
clarify Gamma Permanent Setting For 9.1
Symptom
How to Save Gamma Permanent Setting For 9.1, so That After Rebooting The Value Will Not Change The FE upgraded its system to 9.1 Software. The doctor did not like the LUT (look up table) provided with the software; therefore the FE decided to change to 1.05. He made this modification by typing the command "gamma 1.05". After rebooting the gamma value 1.05 was not saved. The customer wanted a permanent modification of this value.
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.